PRODUCTS
Meteorology and Hydrology
Data Acquisition Systems
Water Quality
Software Application
Special Products
t027 TP200
Rain gauge Transducer, 200cm² funnel area
TP200 is a tipping bucket rain gauge for the measurement of the rain with a collecting area of 200 cm², extremely precise and suitable even for latitudes where high rain intensities are frequent (monsoon or tropical rains).
The tipping bucket consists of a v-shaped element, designed to minimize friction and facilitate the oscillating action, involving benefits in the accuracy even with heavy rainfalls.
The TP200 can be supplied in three different versions, the TP200-N with impulse output without any type of signal conditioning, the TP200-ISR and the TP200-12, both equipped with a signal conditioning electronics that reduces measurement uncertainties at high intensities of precipitation (both for intensity and amount values). TP200-ISR version makes available on a single connector the contact output (rainfall amount), the current output (intensity) and the Modbus serial output with software corrections included (both intensity and amount). The version TP200-12 has the same characteristics of the sensor TP200-ISR, with the difference that the physical and logical output protocol is the standard SDI-12.
The rain gauge in version TP200-N is also available on heated version, powered at 24V (alternating or direct current). TP200 is supplied with power and signal cable (12m).
The TP200 can be supplied in three different versions, the TP200-N with impulse output without any type of signal conditioning, the TP200-ISR and the TP200-12, both equipped with a signal conditioning electronics that reduces measurement uncertainties at high intensities of precipitation (both for intensity and amount values). TP200-ISR version makes available on a single connector the contact output (rainfall amount), the current output (intensity) and the Modbus serial output with software corrections included (both intensity and amount). The version TP200-12 has the same characteristics of the sensor TP200-ISR, with the difference that the physical and logical output protocol is the standard SDI-12.
The rain gauge in version TP200-N is also available on heated version, powered at 24V (alternating or direct current). TP200 is supplied with power and signal cable (12m).
| Amount range | Unlimited |
| Intensity range | 0÷500 mm/h |
| Conversion constant | 0,2 mm/imp |
| Resolution | 0,2 mm |
| Amount accuracy | ±2% @ <300mm/h |
| Intensity Accuracy | ±2% @ <300mm/h |
| Transducer | Tilting bucket on knife blade pivot |
| Working temperature | -20 ÷ 70 °C |
Related products
NEWS
10 May 2022
Baptism of the sea for the new buoy of the Italian national wave network (RON)
The new RON buoy during a Bora storm Less than a month after the launch of the eighth buoy of the National Wave Network, a strong Bora (the Adriatic n...
Read more »
11 April 2022
Siap+Micros in support of a new scientific project of Ispra and Ismar-CNR
The new buoy and the CNR platform The update of the national wave network (RON) which, in 2020, was only a project (we had written about it in a previ...
Read more »
6 April 2022
Partnership with Teconer Oy for road safety
Optical surface sensor Siap+Micros has signed an agreement with Teconer Oy (Finland) aimed to integrate the proven technologies of non contact road su...
Read more »