Carpentry and Accessories

t027-09 SUPTP01

Wall Mounted Support Mast for Rain Gauge

The SUPTP01 is a hot-dip galvanized steel pole suitable for supporting Siap+Micros rain gauges for installation on vertical walls (bridge abutments, parapets or other) through the use of special fixing brackets suitably sized in relation to the specific installation request.

t027-10 SUPTP02

Rain Gauge Support Mast for Plinths/Pitches

The SUPTP02 is a hot-dip galvanized steel pole suitable for supporting Siap+Micros rain gauges for installation on existing floors or foundation plinths using the appropriate fastening bolts (embedded in the foundation plinth), expansion plugs or threaded rods fixed with chemical anchor.

p078 PAL2T

2m Mast for Monitoring Stations

The Pal2T is a 2 meter high hot-dip galvanized steel pole for supporting meteorological, agrometeorological and hydrological monitoring instruments. The installation is foreseen both on foundation plinths or floors with embedded anchor bolts or anchors, and with foundation screws directly into the ground.

p078-11 PAL2P

2 m Pole designed for installation on bridges

The Pal2P is a hot-dip galvanized steel pole 2 meters high for the support of instrumentation for meteorological, agro-meteorological and hydrological monitoring. Installation is foreseen with the p078-01 STFPNT bridge bracket.

p078-01 STFPNT

STFPNT - bridge bracket

The STFPNT bracket, made of hot-dip galvanized steel, is the ideal support for the Pal2P to be installed at the hydrological monitoring station on bridges. The fixing, appropriately sized, is carried out with dowels or threaded rods with chemical anchor.

p098c PAL5L

5m Mast for vertical walls for Monitoring Stations

The Pal5L is a hot-dip galvanized steel pole 5 meters high made up of 3 pieces for the support of meteorological and hydrological monitoring instruments. The installation is foreseen with wall fixing brackets or clamps.

p098c-01 STFP5P

Standard Support for Pal5L, Installation on Bridges

The STFP5P bracket, made of hot-dip galvanized steel, is the ideal support for the Pal5L to be installed on bridges at the installation point of the hydrological monitoring station. The fixing, suitably sized, is done with plugs or threaded rods with chemical anchor.

p098d-PAL5B

5m Mast for Monitoring Stations for installation on plinths

The Pal5B is a hot-dip galvanized steel pole 5 meters high made up of 3 pieces and with a square base for supporting meteorological and hydrological monitoring instruments. The installation is foreseen on suitable foundation plinths with fixing on bolts, dowels or threaded rods with chemical anchor.

p114 PALB10

10m collapsible Mast for Monitoring Stations

The PalB10 is a collapsible hot-dip galvanized steel pole 10 meters high made up of 7 pieces and with a square base to support instrumentation for meteorological and hydrological monitoring. The installation is foreseen on suitable foundation plinths with fixing on bolts, dowels or threaded rods with chemical anchor.

296

p046-06 SUPTLUR

Rotatable bracket for level sensors

The p046-06 SUPTLUR bracket is a galvanised steel bracket for outreach support of level sensors. It can be installed either on poles, thanks to the counter brackets, or on a wall. It is rotatable to ensure easy retrieval of the sensor, such as in a bridge installation. All Siap+Micros radar or ultrasonic level sensors can be mounted on the end.

Show more carpentry and accessories products